Description
2 x 13″x10.5 Rears
and
2 x 13″x9 Fronts
Details:
FRONT: 9×13″ ET1.65 PCD12x85 CB54 weight 4.2kg paints and protectingcoating included
REAR: 10.5×13″ ET10.15 PCD12x85 CB54 weight 4.7kg paints and protectingcoating included
318.8mm inner diameter
Dallara F3 Fittments
Colour Options
Wheels are finished in Anthracite.
Other finishes available are Gold, Mat Black, Mat Silver, Silver andWhite. Please contact us for availability and pricing as some finishesmay cost more than others and have may have longer lead times.
EVO Corse: Leading Competition Wheel Technology
The Evo Corse racing wheel line uses the best technology available forproduction and design, in order to always supply a product of thehighest quality. These wheels are specifically designed for motorsportand competition use. Design starts from a decade long experience inevery kind of racing wheel, using the best CAD/CAM technology andstructural FEM simulation, to have the best optimization in the ratio ofweight and resistance. As an example the 8×17″ wheel for the MitsubishiEVO 8/9 fitment weighs only 8,9 kg!
Features
The wheel design always takes into account the maximum protrusion thatcan be found on modern competition spec brake calipers.
The advanced rim profile is not the same as that is found on a normalstreet/road wheel, but has been optimized for racing tire use.
Spoke design always allows the best brake cooling, without compromisingthe wheels strenght.
Spoke profile and design is studied for the maximum ergonomic benefitduring wheel substitution.
Reinforced lips and spoke profiles are studied to insure maximumprotection of the air valve against mud and stones.
All wheels are fitted with high strength steel inserts, CNC machined toallow the best and most consistent bolt fixing.
Wheels aremade from primary aluminium alloy A356 with heat treatment T6which is low pressure cast in a steel permanent mould. A process that ismore expensive than a normal aftermarket rim (gravity cast and withoutheat treatment), but that can give ultimate performances withoutcompromises.
Pressure Cast Technology
The main differences between the two typical casting processes used inthe wheel industry: low pressure and gravity casting
Advantages of Pressure Cast Technology:
Quality and best reliability.
The reduction of all Imperfections due to gas or casting turbulences.
By filling at the centre of the mould you obtain thebest mechanicalproperties on the lips.
Best metal quality because of the absence of oxide (melted metal ispulled from the bottom)
Reviews
There are no reviews yet.