Description
Ford Focus Mk3 Control Arm Wishbone Front Right O/S Suspension is an original component from the Control arms and ball joints category, designed for operation on the right side of the front axle. It is a solid foundation for restoring proper suspension geometry, handling stability, and predictable vehicle behavior in daily use.
Specifications and technical data
- SKU: F1F1-3A423-AAB
- Mark: Ford
- Condition: Used
- OEM Part Number: F1F1-3A423-AAB
- Substitutable numbers: F1F1-3A423-AAB, F1F13A423AAB
- Location on the vehicle: Front, Right
- Category: Control Arms, Ball Joints & Assemblies
Purpose and function in the suspension system
The presented control arm is designed for installation on the front, right side of the vehicle, where it is responsible for precise wheel guidance relative to the body. As a load-bearing element of the suspension system, it transfers loads from the road to the chassis, working in conjunction with the shock absorber, spring, and ball joint.
A properly selected control arm limits unwanted changes in wheel alignment and camber angles, which translates into:
- stable handling at higher speeds,
- more predictable vehicle behavior in corners,
- even tire wear,
- reduction of vibrations transmitted to the body.
Original origin and fitment for Ford
The control arm has been developed specifically for Ford models, ensuring it maintains factory mounting points and operating geometry. This means that after proper installation, no structural modifications are required, and the component works seamlessly with standard mounts, the ball joint, and other suspension components.
Such fitment ensures:
- consistency with the factory Ford suspension design,
- easier installation compared to aftermarket replacements of uncertain origin,
- preservation of the handling characteristics intended by the manufacturer.
Performance characteristics and benefits of installation
Replacing a worn or damaged control arm with a functional unit allows for the elimination of suspension play, knocking sounds when driving over bumps, and imprecise handling. The front right control arm is crucial for maintaining vehicle alignment, which is why its condition directly affects driving safety.
After installation and wheel alignment, you can expect:
- more precise steering response,
- better traction during braking and acceleration,
- reduction of vehicle “wandering” in ruts,
- greater acoustic comfort inside the cabin.
Component condition and installation aspects
The offered control arm comes from the used parts group, which allows for lower repair costs while maintaining the original Ford construction. Before installation, it is recommended to perform a standard verification of the condition of mounting points, bushing sockets, and the ball joint, followed by setting the suspension geometry after the work is completed.
Due to its location on the front right side of the vehicle, installation should be performed in accordance with service procedures, including tightening bolts while the suspension is under load, so as not to shorten the service life of the bushings and joints working with the control arm.
Technical support and additional information
For users who want to better understand how the suspension works and the relationships between control arms, shock absorbers, and stabilizers, the following guide will be useful: Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers. The article helps to assess when replacing a single component is sufficient and when it is worth planning a wider range of service work.
If you are planning a comprehensive repair or upgrade of the front suspension area in your Ford and need other elements from the same group, such as additional control arms, ball joints, or mounting hardware, check the available parts in the Ford Control arms and ball joints category.
Reviews
There are no reviews yet.